11
OPERATIONAL INSTRUCTIONS
USING THE FITNESS METER
1. Rechargeable batteries are not recommended.
NOTE:
1. Open the Battery Door on the back of the meter.
2. The meter operates with an AA battery, the battery is not included.
Refer to the illustration to install or replace the battery.
HOW TO INSTALL AND REPLACE BATTERIES:
FUNCTIONS:
Seat movement or press the button.
Automatic shut off after four minutes of inactivity.
POWER OFF :
POWER ON :
FUNCTION BUTTON:
The meter will shut off automatically after four minutes of inactivity. All function values
will be kept. Press the button and hold it down for three seconds to reset all functions
to zero.
NOTE:
AA Battery
Displays the number of rows you have taken on upper display, from zero to 9999 rows.
Automatically scans each function of TIME, CALORIES, DISTANCE, and TOTAL COUNT
in sequence changing every six seconds. Press and release the button until the arrow
appears on the display and point to the SCAN.
Displays the time from one second up to 99:59 minutes. After four seconds of inactivity,
the meter will automatically stop timing the workout. Restart the workout time by moving
the seat.
Displays the calorie burned, from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
Displays the distance, from zero to 99.99 miles.
Displays the total accumulated number of rows you have taken, from zero to 9999 rows.
The total accumulated rows is retained when the meter is turned off, until the battery is
removed.
COUNT
:
SCAN:
TIME:
CALORIES:
DISTANCE:
TOTAL COUNT
:
Ultimate disposal of battery should be handled according to all
state and federal laws and regulations.
Press to select lower display functions. Lower display functions include
SCAN, TIME, CALORIES, DISTANCE, and TOTAL COUNT.
Press and hold for three seconds to reset all functions to zero.
To Next Page
Loading...
