Stamina 1735 - Assembly Instructions: Upright Supports; Step 3: Attaching Upright Supports; Step 4: Inserting Upper Uprights

ASSEMBLY INSTRUCTIONS
STEP 3
Attach the UPRIGHT SUPPORTS(7) to the BASES(1) on both sides with HEX BOLTS(M8x1.25x35mm)
(35) and WASHERS(M8)(37). Attach the UPRIGHT SUPPORTS(7) to the UPRIGHTS(3) on both sides
with HEX BOLTS(M10x1.5x65mm)(31), WASHERS(M10)(36), and NYLOCK NUTS(M10x1.5)(38).
STEP 4
Insert both of the UPPER UPRIGHTS(5) into the UPRIGHTS(3).
8
31
36
36
38
5
3
3
7
35
37
1
1
31
36
31
36
36
38
7
35
37
31
36
5