ASSEMBLY INSTRUCTIONS
7
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Attach the FRONT STABILIZER(3) to the CENTER BEAM(2) with CARRIAGE BOLTS(M8x1.25x40mm)
(23), WASHERS(M8)(12), and ACORN NUTS(M8x1.25)(14).
STEP 2
Refer to the illustration below and detail view A. Attach the SEAT(7) to the SEAT CARRIAGE(5) with BUTTON
HEAD BOLTS(M8x1.25x15mm)(21) and WASHERS(M8)(12). Slide the two SECURING ROLLERS(33)
to the shafts on the SEAT CARRIAGE(5). Slide the SEAT CARRIAGE ASSEMBLY(5) onto the CENTER
BEAM(2).
A.
To Next Page
Loading...
