33
Stopper 1 or 2 is locked
at the upper limit.
Turn off the power switch and turn the stopper
adjusting knobs 3 rotations counterclockwise. Then
turn on the power switch.
If the stopper locks at the upper limit repeatedly,
turn on the power switch again with the clear button
pressed.
Stopper 1 or 2 is locked at
the lower limit.
Turn off the power switch and turn the stopper adjusting knobs 3 rotations clockwise. Then
turn on the power switch.
If the stopper locks at the lower limit repeatedly, turn on the power switch again with the
clear button pressed.
Cause
Remedy
Cause
Remedy
Stopper 1 or 2 stops at
upper limit and does not
move?
Check
1
2
3
4
5
6
7
89
0
C
er
1
st
Stopper
Memory
Mode
Stopper
Position
Display
Error Please wait
1
2
3
4
5
6
7
89
0
C
er
1st
Stopper
Memory
Mode
Stopper
Position
Display
Error Please wait
YES
NO
NO
Troubleshooting
Error Message Appears on the Display
1
2
13
12
11
10
9
If the machine does not work properly even
if performing the remedies above, please
call your local dealer.
If the machine does not work properly even if performing
the remedies above, please call your local dealer.
The memorized job data
will all deleted.
WARNING
Stopper
The memorized job data
will all deleted.
WARNING
Clear Button
Clear Button
Stopper Adjusting Knob
Stopper Adjusting Knob
To Next Page
Loading...