32
Error Message Appears on the Display
Error message will appear when there are misoperation and the machine can not start folding.
Check the cause and perform the remedies to clear the error.
Stopper locks because of the
sheet jam inside the buckle,
and the breaker is tripped.
Turn off the power switch once and remove
the sheet inside the buckle.
Push the breaker under the table which is
popped out, and turn on the power switch.
Error Check breaker
Cause
Remedy
Refer to page 30.
Breaker under the table
is popped out?
Check
Error Check breaker
Table Empty
0 / 0 Jamming
Close Buckle
Safety Function Working
0 / 0 Feed Error
P.32,33
P.34
P.34
P.34
P.34
P.34
NO
YES
Go to next page
0.3A
0.3A
If the breaker trips again even if performing
the remedies above, please call your local
dealer.
For 1st stopper
For 2nd stopper
To Next Page
Loading...