Standard PF-P330 - Page 53

51
Operating Procedures
Presetting the required number of folded sheets
Power ON.
Set the end stopper.
Select the sheet size
and fold pattern.
Adjust the stopper
position with knob.
Input the required number
of folded sheets.
Clean the roller.
Fold skew
Folding shift
Set the delivery roller.
Press test button to check
the folding quality.
Press start button to start folding.
Press start button to start folding.
Place the sheets.
Parallel Fold
Letter Fold
Gate Fold
Single Fold
Accordion Fold
Short Fold
Screen Description
Appendix