To Next PageTo Next Page
Need help?Do you have a question about the Stanley 51192 and is the answer not in the manual?
General| Brand | Stanley |
|---|---|
| Model | 51192 |
| Category | Remote Control |
| Language | English |
Explains the unique pairing feature for controlling multiple receivers from one transmitter.
Step 2: Press and hold the receiver power button for 5 seconds to activate pairing mode.
Step 3: Press the transmitter's ON button, then the OFF button to finalize pairing.
Step 1: Press and hold the receiver power button for 5 seconds to begin removal.
Step 2: While flashing, hold the receiver power button for another 5 seconds.
Step 3: Press the receiver power button once while flashing rapidly to confirm the reset.
Mount receiver 6" above ground, point outlets down, use GFCI outlet.
Control receiver power ON/OFF using the transmitter's buttons.
Use transmitter's photocell setting to turn devices on instantly and off at dawn.
Press receiver button once to override, avoid holding to prevent pairing mode.
