To Next PageTo Next Page
Need help?Do you have a question about the Stanley PK602 and is the answer not in the manual?
General| Brand | Stanley |
|---|---|
| Model | PK602 |
| Category | Remote Control |
| Language | English |
Explains the unique pairing feature allowing control of multiple receivers from one transmitter.
Press and hold the receiver's power button for 5 seconds to activate pairing mode.
Press the transmitter's ON then OFF button to complete the pairing process.
Press and hold the receiver's power button for 5 seconds to begin transmitter removal.
Hold receiver power button for 5 seconds while indicator flashes rapidly.
Press receiver power button once to confirm the reset and remove transmitters.
Plug receiver into grounded outlet and connect devices to receiver base.
Manually power the unit ON and OFF using the override button on the receiver.
Set device to automatically turn off at dawn using photocell mode.
Details the CR2032 lithium battery for the transmitter and how to replace it.
Resets the receiver and removes all paired transmitters; refers to installation step 1.
