Stanley Fat max User Manual

Catalog Number
FME340
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
INSTRUCTION MANUAL
VS Orbital Jig Saw

Stanley Fat max Specifications

Power

voltage	120 V
power	670 W
current consumption	6.0 A

Operating Environment

frequency	60 Hz

Summary

General Safety Rules

Electrical Safety

Follow rules for plugs, grounding, water, cord care, outdoor use, and GFCI.

Personal Safety

Stay alert, use PPE, prevent unintentional starting, remove keys, and maintain balance.

Specific Safety Rules

Handling and Blade Safety

Hold by insulated grips, secure workpiece, keep hands away from cutting area, and ensure blade stops before removal.

Tool Cleaning and Vibration

Personal Protective Equipment (PPE)

Always wear safety glasses. Use face/dust mask if dusty. Wear certified safety equipment.

Required Protective Gear

Wear ANSI Z87.1 eye, ANSI S12.6 hearing, and NOSH/OSHA respiratory protection.

Chemical and Dust Exposure

Be aware of chemical hazards in dust. Reduce exposure with ventilation and approved safety equipment.

Operation

Blade Installation

Adjusting Shoe for Bevel Cuts

Set the shoe to a bevel angle by releasing and relocking the shoe beveling lever.

Resetting Shoe for Straight Cuts

Switching On and Off

Variable Speed Control

Cutting Action - Orbital or Straight

Select straight or orbital cutting action using the lever; orbital is aggressive for soft materials.

Troubleshooting

Unit Will Not Start

Maintenance

Service and Repairs

Authorized Service and Repairs

Three Year Limited Warranty