Stanley NB08PT-18 - Page 7

7
Table C Thin head Hexsert® compatible chart *：Option parts
Nut Size
MANDREL
NOSEPIECE
Part No.
O.D
Part No
I.D
M4
PNT600-01-4P*
φ4
TNM00151*
φ4.1
M5
PNT600-01-5P
φ5
TNM00152*
φ5.1
M6
PNT600-01-6P
φ6
TNM00153*
φ6.1
M8
PNT600-01-8P*
φ8
TNM00150*
φ8.1
MANDREL AND NOSEPIECE (OPTIONS)
1. Pipe Nut (Made to order)
When fastening the pipe nut SRH-630-191-K2, install the nose assembly for the pipe
nut. The mandrel used is PNT600-01-6P. Please refer to the following list for the
nose assembly components for pipe nuts.
●SRH-630-191-K2
Nose Assembly
TNM00354
SA Mast Housing
TNM00355
SA Nose Housing
TNM00356
Nose Housing
TNM00257
Nose Slider
PNT600-137A
Slider Spring
AN600P-31
Retaining Ring
AN600P-32
Nosepiece
PNT600-02-6NP
Lock Nut
PNT600-03
Hexagon socket button bolt
PNT600-100
Spacer
PNT600-138
Outside Diameter
M8×1.0
Inside Diameter
Lock Nut
Slider Spring
Nosepiece
Retaining Ring
Nose Slicer
Nose Housing
SA Mast Housing
Spacer
Button Head Cap Screw