Stanley NB08PT-18 - Page 9

9
3. HB Bolt (Made to order)
When tightening HB bolts, replace the mandrel attached to the following nosepiece
and tool with the following socket to make a tool for HB bolts.
HB Bolt
Socket
Nosepiece
SPB-650R-WB*****
PNT600-01-6HB-WB
PNT600-02-6HB-WB
SPB-625-RLT
PNT600-01-6HB
PNT600-02-6HB
4. Slit Nut (Made to order) *Only can be used by Stroke control
When fastening the slit nut, attach the sleeve to the outer diameter of the
mandrel and replace it with the following nose piece. The mandrel used is
PNT600-01-6P.
Slit Nut
Nosepiece
SPH-640-SLIT
PNT600-02-64SLT-S
ENS-M6SV-S
SPH-670-SLIT
PNT600-02-67SLT-S
Nosepiece
Socket
Socket
Sleeve