Stanley ProSet XT2 - Tool Set Up; Nose Equipment Setup; Air Supply Setup

11
ENGLISH
2.2 PLACING SPECIFICATIONS
Rivet Type
2,4
[3/32´´]
3,2
[1/8´´]
4,0
[5/32´´]
4,3 4,8
[3/16´´]
5,0 6,0 7,0
Open End
  
Closed End
  
HR
  
SSD SSHR

(1)

(1)
Multi-Grip
  
TL
  
Pull-Thru

T-Rivet (Emhart)

(1)
Self-Plugger
  
Ultra-Grip (UG) (NPR)

Avex®
  
Stavex®
  
Avinox®
  
Avibulb®
  
LSR/Bulbex®
 
T-Lok®
 
Avdel® SR
  
Interlock®

Monobolt®

(1)
Avseal® (STD)

(1)(2)

(1)(2)

(1)(2)

(1)(2)
Q Rivet
  
Klamp-Tite BAPK®

Klamp-Tite BAPKTR®

(1)
VGrip

 Is applicable for XT2 tool
(1) Non-standard nose piece required
 Is only applicable for XT2 tool
(2) Non-standard nose equipment required.
For afull list of compatible nose equipment for each rivet type, together with assembly and maintenance
instructions, please refer to the ProSet Nose Equipment Manual 07900-09412