Stanley ProSet XT4 - 5. Pin Tail Deflector Kit; Preparing the Base Tool for Pin Tail Deflector

ENGLISH
2.3. PLACING SPECIFICATION
Rivet Type
Rivet Diameter mm [inches]
4,0
[5/32]
4,3
4,8
[3/16]
6,0
6,4
[1/4]
7,0
8,0 9,0 10,0
11,0 12,0
Open End
• '' • - •
Closed End
• '' • - •
HR • '' • •
HS
•
Multi-Grip •• • - •
TL • . •
T-Rivet (Emhart) • '' • •
Self-Plugger •• • •
Ultra-Grip & UG (NPR)
CD •
Avex®
• (2)
• (2)
• (2)
Stavex®
• (2)
• (2)
• (1)(3)
LSR/Bulbex®
• (2) • (2)
Avinoe/Avibulb®
• (2) • (2) • (2)
AvinoeXT/Avibulb®XT
• (1)(3)
T-Lok®
• (2) • (2)
Avdel® SR
• (2) • (2) • (2)
Hemlok®
• (1)(3)
Interlok
Maxlok®
• (3) • (3)
Monobolt
Avtainer®
• (1)(3)
Avseal® (STD)
• (1)(3)
• (1)(3) • (1)(3)
• (133) • (133)
Avseal® (Low Press)
• (1)(3) • (1)(3) • (1)(3) • (1)(3) • (1)(3)
Q Rivet
• (2) • (2) • (2)
T Rivet (Avdel)
• (1)(2) • (1)(2)
Avdelmate®
• (2) • (2)
Klamp-Tite®BAPK
Klamp-Tite® BAPKTR
Avdelok®
• (3) • (3)
* Use PRG540-46 jaws and FAN276-064 jaw pusher assembly
** Use PRG540-46 jaws.
(1) Non-standard nose piece required
(2)
Alternative type nose equipment available
(3) Non-standard nose equipment required.
For a full list of compatible nose equipment for each rivet type, together with assembly and maintenance
instructions, please refer to the ProSet° nose equipment manual 07900-09414
11

POP a Avdel°
2.3. PLACING SPECIFICATION
Rivet Type
Rivet Diameter mm [inches]
4,0
[5/32]
4,3
4,8
[3/16]
6,0
6,4
[1/4]
7,0 8,0 9,0 10,0 11,0 12,0
Open End

*

**

Closed End

*

**

HR

*
 
HS

Multi-Grip

*

**

TL

*

T-Rivet (Emhart)

*
 
Self-Plugger

*
 
Ultra-Grip & UG (NPR)
CD

Avex®

(2)

(2)

(2)
Stavex®

(2)

(2)

(1)(3)
LSR/Bulbex®

(2)

(2)
Avinox®/Avibulb®

(2)

(2)

(2)
Avinox®XT/Avibulb®XT

(1)(3)
T-Lok®

(2)

(2)
Avdel® SR

(2)

(2)

(2)
Hemlok®

(1)(3)
Interlok
Maxlok®

(3)

(3)
Monobolt
Avtainer®

(1)(3)
Avseal® (STD)

(1)(3)

(1)(3)

(1)(3)

(1)(3)

(1)(3)
Avseal® (Low Press)

(1)(3)

(1)(3)

(1)(3)

(1)(3)

(1)(3)
Q Rivet
(2) 
(2)

(2)
T Rivet (Avdel)

(1)(2)

(1)(2)
Avdelmate®

(2)

(2)
Klamp-Tite®BAPK
Klamp-Tite® BAPKTR
Avdelok®

(3)

(3)
* Use PRG540-46 jaws and FAN276-064 jaw pusher assembly
** Use PRG540-46 jaws.
(1) Non-standard nose piece required
(2) Alternative type nose equipment available
(3) Non-standard nose equipment required.
For a full list of compatible nose equipment for each rivet type, together with assembly and maintenance
instructions, please refer to the ProSet® nose equipment manual 07900-09414
ENGLISH
11