9
ENGLISH (Original Instructions)
OPTIONAL ACCESSORIES
WARNING: Since accessories, other than those
offered by STANLEY, have not been tested
with this product, use of such accessories with
this tool could be hazardous. To reduce the
risk of injury, only STANLEY, recommended
accessories should be used with this product.
Consult your dealer for further information on the
appropriate accessories.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY product
needs replacement, or if it is of no further use to you, do
not dispose of it with household waste. Make this product
available for separate collection.
STANLEY provides a facility for the collection
and recycling of STANLEY products once they
have reached the end of their working life. To
take advantage of this service please return
your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised
repair agent by contacting your local STANLEY office at
the address indicated in this manual. Alternatively, a list
of authorised STANLEY repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
NOTES
STANLEY’s policy is one of continuous improvement to
our products and as such, we reserve the right to change
product specifications without prior notice. Standard
equipment and accessories may vary by country. Product
specifications may differ by country. Complete product
range may not be available in all countries. Contact your
local STANLEY dealers for range availability
SERVICE INFORMATION
STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service centers
and if you need technical advice, repair, or genuine factory
replacement parts, contact the STANLEY location nearest
you.
TECHNICAL DATA
1/4 SHEET SANDER SS24
Voltage
V
AC
220-240 ~
Frequency Hz 50-60
Power input W 240
Orbits(no load) min
-1
16000
Sanding base surface mm 110x104
Weight kg 1.1
Level of sound pressure according to EN 62841:
Sound pressure (L
pA
) dB(A) 91,5
Sound pressure uncertainty (K
pA
) dB(A) 3
Sound power (L
WA
) dB(A) 80,5
Sound power uncertainty (K
WA
) dB(A) 3
Vibration emission value ah:
(ah) = m/s
2
5,4
Uncertainty (K) = m/s
2
1,5
VIBRATION
The declared vibration emission values stated in the
technical data and the declaration of conformity have
been measured in accordance with a standard test method
provided by EN62841 and may be used for comparing one
tool with another. The declared vibration emission value
may also be used in a preliminary assessment of exposure.
WARNING! The vibration emission value during
actual use of the power tool can differ from
the declared value depending on the ways in
which the tool is used. The vibration level may
increase above the level stated.
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons
regularly using power tools in employment, an estimation
of vibration exposure should consider, the actual
conditions of use and the way the tool is used, including
taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it is
running idle in addition to the trigger time.
To Next Page
Loading...
