Stanley TLM165s - Specifications

10
E
Specications
Range 6in to 165ft (.15m to 50m)
Measuring Accuracy* ± 1/16in (± 1.5mm)*
Resolution** 1/16in (1mm)**
Laser Class
Class 2 (IEC/EN60825-1:
2007/2014)
Laser Type ≤ 1.0mW @ 620-690nm
Laser/Backlight Automatic Switch-off After 30s
Unit Automatic Switch-off After 90s
Continuous Measuring Yes
Area Yes
Volume Yes
Pythagoras 2-Point Yes
Pythagoras 3-Point Yes
Endpiece to measure from corners or
grooves
Yes. Flip open the endpiece at the bottom of the tool when
you need to t the tool into corners or grooves that are not
at 180° angles. If a corner is at 90°, the endpiece can be
used to hold the tool up against something.
Battery Life (3 x AAA)
Up to 3000 Measurements (2500 with
)
Dimension (H x D x W) 4.72 x 1.91 x 1.02in (120 x 48.5 x 26mm)
Weight (with Batteries) 9.88oz (280g)
Storage Temperature Range 13° F ~ 158° F (-25° C ~ +70 C)
Operating Temperature Range 32° F ~ 104° F (0° C ~ +40° C)
*Measuring Accuracy depends on the current conditions:
• Under favorable conditions (good target surface and room temperature), up to 33ft (10m).
• Under unfavorable conditions (bright sunlight, a very weak reecting target surface, or large temperature uctuations), the
error can increase to ± 0.002 in/ft (± 0.2mm/m) for distances over 33ft (10m).
**Resolution is the nest measurement you can see. In inches, that is 1/16". In mm, that is 1mm.