4
E
Contents
• User Safety
• Battery Safety
• Loading Batteries
• Using the Tool
• Warranty
• Error Codes
•
Retain all sections of this manual for future reference.
User Safety
WARNING:
Carefully read the Safety Instructions and
Product Manual before using this product. The
person responsible for the product must ensure
that all users understand and adhere to these
instructions.
WARNING:
The following label information is placed on your
laser tool to inform you of the laser class for your
convenience and safety.
DW0165
4.5V DC
DW0165S
FCC ID: xxxxxDW0165S
IC: xxxxx-DW0165S
4.5V DC
The TLM165s tool emits a visible laser beam, as
shown in Figure
A
1
. The laser beam emitted is Laser
Class 2 per IEC 60825-1 and complies with 21 CFR
1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007.
WARNING:
While the laser tool is in operation, be careful not
to expose your eyes to the emitting laser beam
(red light source). Exposure to a laser beam
for an extended time period may be hazardous
to your eyes. Do not look into the beam with
optical aids.
WARNING:
To reduce the risk of injury, user must read the
Product User manual, Laser Safety manual, and
Battery Safety information.
FCC ID: 2ANWF-TLM165
IC: 23237-TLM165
To Next Page
Loading...
