3
INTRODUCTION
Thank you and congratulations on purchasing a Stannah Microlift.
Before using your Microlift, you should read this User Handbook and ensure that all
employees are thoroughly trained in both its safe operation and use.
Your Microlift is a precision product manufactured to the highest quality standards and conforms
with all British and European statutory requirements for goods lifts as shown on our ‘EC
Declaration of Conformity’, which has been issued in accordance with the Machinery (Safety)
Regulations.
Your Microlift will give you many years of trouble-free operation provided that it is properly
maintained and treated with respect. Points to ensure consistent satisfactory service are covered in
this handbook. In the unlikely event of difficulty, please read the section on Troubleshooting on
page 18 - it could save you the cost of an unnecessary service call.
Important - please read
IMPORTANT SAFETY NOTICE
A ‘Lock Release’ key will have been left by our installers in the Microlift motor compartment.
It is for use by trained lift engineers only - DO NOT attempt to use it yourself.
Whenever a landing door is unlocked with the carrier not stationary or not at the level of the
landing then persons on the landing will be at risk. It is therefore essential that any emergency
door keys supplied are kept securely and only provided to a fully trained and authorised
person (for example a trained lift engineer), who has the knowledge to use the key safely to
open the door and to check the door has satisfactorily locked after it has been closed.
To Next Page
Loading...
