Stanton SA.3 - Technical Specifications; Replacement Parts

Line inputs: 2 (RCA) x 2 channels, -10 dBV /10 kOhm
Phono inputs: 2 (RCA) x 2 channels, -50 dBV / 47 kOhm
Master output: 2 (TRS Balanced/RCA unbalanced),
+4 dBu balanced / -10 dBV unbalanced
Headphone output: 1 (1/4 inch), 1 (1/8 inch), greater than 32 Ohm load
Frequency Response: 20 Hz - 20 kHz, +/- 1.5 dB
Tone Control : Hi +9/-18 dB
Mid +9/-25 dB
Low +9/-25 dB
S/N Ratio: Better than 94 dB (ref: max input level)
Noise: -80 dBV (Line input to any output)
T.H.D Less than 0.04% (1 kHz)
Dimension(LxWxD): 12.4" x 9.25" x 4.33"in; (315 x 235 x 110mm)
Weight: 6.6 lbs 3 kgs
TECHNICAL SPECIFICATIONS
The following user replaceable parts are available from your local
Stanton dealer.
CFSA3 Crossfader
LFSA3 Linefader
CF-PG110 Penny & Giles crossfader
CF-F1 Focus Fader V1
CF-F2 Focus Fader V2
PLSA3 Phono / Line switch
3PLSA3 Phono / Line switch (w/Flash)
PPSA3 PROTEKT™ panel
PS-18US US Power Supply (110v)
PS-18EU European Power
Supply (220v)
PS-18UK UK only Power Supply (240v)
REPLACEMENT PARTS