Set left and right margins
Mode ASCII
Decimal Hexadecimal
Both I
<ESC>
“X” nl n2 I27 88 nl n2 I IB 58 nl no
Sets the left margin at column nl and the right margin at column n2. See
the preceding commands for margin restrictions and other notes.
Carriage return
1 Mode 1 ASCII
I Decimal
1 Hexadecimal I
I
I
Both I <CR>
I 13 1 OD
Prints the current line and returns the next print position to the left margin.
If DIP switch l-8 is ON, also performs a line feed.
Set automatic line feed
IModel ASCII
I Decimal I Hexadecimal I
IBM
<ESC> “ ”
5
Cl> 1 27 53 1
1B 35 01
Causes the printer to perform both a carriage return and line feed each
time it receives a < CR > code. This command takes priority over DIP
switch l-8.
Cancel automatic line feed
Mode 1 ASCII
Decimal Hexadecimal
I
IBM <ESC> “ 5 ” co> 27 53 0 1B 35 00
Causes the printer to perform only a carriage return when it receives a
<CR > code. This command takes priority over DIP switch l-8.
Backspace
Mode ASCII
Decimal Hexadecimal
Both CBS>
8 OX
Moves the print position one column to the left. Ignored if the print
position is at the left margin. This command can be used to overstrike
or combine characters.
Left justify
IModel ASCII I
Decimal Hexadecimal
I
<ESC> “ii” “0” 27 97 48 1B 61 30
Both
< ESC > “a” co> 27 97 0 1B 61 00
Aligns subsequent text with the left margin, leaving the right margin
ragged.
To Next Page
Loading...
Need help?
General
