Appendix D
CHARACTER SETS
This appendix gives tables of the printer’s standard and IBM character
sets.
The decimal character code of each character is shown in an inset to
the lower right of the character.
The hexadecimal code can be found by reading the entries at the top
and left edges of the table. For example, the character “A” is in column 4
and row 1, so its hexadecimal character code is 41. This is equivalent (4 x
16 + 1 = 65) to decimal 65, the number in the inset.
Control codes recognized by this printer are indicated by abbreviations
inside pointed brackets < > .
< Sample >
r
Character
Hexadecimal value
(high order)
1 Hexa- I
decimal ,,
1
2 3
4 5
6 7
Control code
Hexadecimal value
(low order)
Decimal value
To Next Page
Loading...
