EasyManua.ls Logo

Star Micronics LC24-10 - Switch Combination Functions

Star Micronics LC24-10
119 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Coding for IBM-PC with color adaptor:
20
GOSUB 100
100
O=INP(&H379)
:IF 0<128 THEN
100
110 OUT bH378,I :OUT &H37A,5 :OUT &H37A,4
120 RETURN
SWITCH COMBINATION FUNCTIONS
Several additional functions can be obtained by pressing the control
panel switches in combinations.
Reverse micro-feed
1pyzg
Clearing the buffer
Figure 2-5. Switch combination functions of control panel
Paper parking: Quiet Mode and Paper Feed switches
This procedure feeds the paper backward. It parks the fanfold form
at the back of the printer so that you can switch to single-sheet feeding (by
moving the release lever to the down position).
Before parking fanfold forms, tear off all but the last page, leaving less
(at least three inches less) than a full page showing above the top cover.
1. Press the On Line switch to set the printer off-line.
2. Press the Quiet Mode switch and hold it down.
3. Press the Paper Feed switch. The paper will be fed out backward
25

Table of Contents

Related product manuals