Relative horizontal tab
Mode ASCII
Decimal
Hexadecimal
Std. < ESC > “\” nl n2
21 92 nl n2
1B 5C nl n2
IBM
< FS > “\” nl n2 28 92 nl n2
1C 5C nl n2
Moves the print position right or left a specified distance (maximum 6
inches). Ignored if the resulting position is beyond the right or left margin.
The formulas for the distance and direction are as follows:
If n2 is between 0 and 63, the print head moves right by (nl + n2 x 256)
dots
If n2 is between 64 and 127, the print head moves left by (nl + [n2 -
641 x 256) dots
Relative horizontal tab in inches
Mode ASCII Decimal
Hexadecimal
IBM
<ESC> “d” nl n2 27 100 nl n2
1B 64 nl n2
Sets the next print position to (nl + n2 x 256)/120 inches from the current
position. Ignored if this position is beyond the right margin. The maximum
position is 8 inches.
Absolute horizontal tab in inches
ASCII Decimal
Hexadecimal
<ESC> “$” nl n2 1 27 36 nl n2 I 1B 24 nl n2
Sets the next print position to (nl + n2 x 256)/60 inches from the left
margin on the current line. Ignored if this position is beyond the right
margin. The maximum position is 8 inches.
Absolute horizontal tab in columns
Mode
ASCII
Decimal
Hexadecimal
<ESC> “f’ “0” n
27 102 48 n 1B 66 30 n
Both
-
<ESC> “f CO> n
27 102 0 n 1B 66 00 n
Moves the next print position to column n from the left margin, where
n is between 0 and 127.
To Next Page
Loading...
