Star Micronics SLIP SP298 SERIES - Page 25

22
<ESC> “W” n 1B 57 n Sets the magnification rate in character width 32
<ESC> “h” n 1B 68 n Sets the magnification rate in character height 32
<ESC> “–” “1”
<ESC> “–” <1>
1B 2D 31
1B 2D 01
Selects underlining 32
<ESC> “–” “0”
<ESC> “–” <0>
1B 2D 30
1B 2D 00
Cancels underlining 32
<ESC> “_” “1”
<ESC> “_” <1>
1B 5F 31
1B 5F 01
Selects upperlining 32
<ESC> “_” “0”
<ESC> “_” <0>
1B 5F 30
1B 5F 00
Cancels upperlining 32
<ESC> “4” 1B 34 Selects highlight printing 33
<ESC> “5” 1B 35 Cancels unhighlight printing 33
<SI> 0F Inverted printing 33
<DC2> 12 Cancels inverted printing 33
<ESC> <RS> “i” “0”
<ESC> <RS> “i” <0>
1B 1E 96 30
1B 1E 96 00
Cancels rotated print mode for text (Default) 33
<ESC> <RS> “i” “1”
<ESC> <RS> “i” <1>
1B 1E 96 31
1B 1E 96 01
Specifies rotated print mode for text with a 270˚ rotation. 33
<ESC> <RS> “i” “2”
<ESC> <RS> “i” <2>
1B 1E 96 32
1B 1E 96 02
Specifies rotated print mode for text with a 90˚ rotation. 33
<ESC> “E” 1B 45 Selects emphasized printing 34
<ESC> “F” 1B 46 Cancels emphasized printing 34
<ESC> “U”
n 1B 55 n Selects print direction 34
Control Codes
Hexadecimal
Codes
Function Page