Star Micronics SLIP SP298 SERIES - Print Position Control

23
Print Position Control
Control Codes
Hexadecimal
Codes
Function Page
<LF> 0A Line feed 35
<CR> 0D Carriage Return 35
<ESC> “a”
n 1B 61 n Feeds paper n lines 35
<HT> 09 Horizontal tab 35
<ESC> “A” n 1B 41 n Defines n /72-inch line spacing 35
<ESC> “2” 1B 32 Sets n /72-inch line spacing 36
<ESC> “z” “0”
<ESC> “z” <0>
1B 7A 30
1B 7A 00
Sets line spacing to 1/12-inch 36
<ESC> “z” “1”
<ESC> “z” <1>
1B 7A 31
1B 7A 01
Sets line spacing to 1/6-inch 36
<ESC> “0” 1B 30 Sets line spacing to 1/8-inch 36
<ESC> “1” 1B 31 Sets line spacing to 7/72-inch 36
<ESC> “J” n 1B 4A n One time n /72-inch feed 37
<ESC> “j” n 1B 6A n One time n /72-inch backfeed 37
<ESC> “3” n 1B 33 n Sets line spacing to n /216-inch approximately 37
<ESC> “y” 1B 79 n Sets line spacing to n /144-inch 37
<ESC> “D” n 1 n 2 ...
<0>
1B 44 n 1 n 2 ... 00 Sets horizontal tab stops 38
<ESC> “l” n 1B 6C n Sets left margin 38
<ESC> “Q” n 1B 51 n Sets right margin 38
<ESC> <GS> “a” “0”
<ESC> <GS> “a” <0>
1B 1D 61 30
1B 1D 61 00
Left justification (Default) 39
<ESC> <GS> “a” “1”
<ESC> <GS> “a” <1>
1B 1D 61 31
1B 1D 61 01
Centering 39
<ESC> <GS> “a” “2”
<ESC> <GS> “a” <2>
1B 1D 61 32
1B 1D 61 02
Right justification 39