Star Micronics SLIP SP298 SERIES - Page 48

45
Peripheral Device Control
<ESC> <BEL> n1 n2
1B 07 n1 n2
Defines drive pulse width for peripheral device #1
Defines the drive pulse width for peripheral devices requiring other
than standard 200 ms pulse time and delay time.
n1 indicates the energizing time and n2 indicates the delay time,
using 10ms units.
<BEL>
07
Controls peripheral device #1
Executes drive pulse for peripheral device #1.
<FS>
1C
Controls peripheral device #1 immediately
Executes drive pulse for peripheral device #1 immediately.
<EM>
19
Controls peripheral device #2 immediately
Drives peripheral device #2. The drive pulse width and delay time
are fixed at 200 ms.
<SUB>
1A
Controls peripheral device #2 immediately
Drives peripheral device #2. The drive pulse width and delay time
are fixed at 200 ms.
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION