Star Micronics TSP100IIILAN - Paper Size and Font Settings

Software Manual
40
Peripheral Unit Type
Use this setting to select the type of peripheral to be used with the printer.
Value
Default
Details
Buzzer
*
Use buzzers as peripheral device.
Cash Drawer
Use buzzers as peripheral device.
Caution:
When using a peripheral unit such as a cash drawer other than a buzzer, do not select
"Buzzer".
If selected, it may result in damage to a peripheral unit.
Notes:
The buzzer and cash drawer are optional devices.
They cannot be used at the same time.
Peripheral Unit 1
This setting selects the action timing for peripheral unit 1.
Note that the Page Top and Page Bottom selections are not available if you have set the Peripheral
Unit Type to Cash Drawer.
Value
Default
Details
No Use
*
Peripheral unit 1 not used.
Document Top
Activate at top of document.
Page Top
Activate at top of page.
Page Bottom
Activate at bottom of page.
Document Bottom
Activate at bottom of document.
Peripheral Unit 2
This setting selects the action timing for peripheral unit 2.
Note that the Page Top and Page Bottom selections are not available if you have set the Peripheral
Unit Type to Cash Drawer.
Value
Default
Details
No Use
*
Peripheral unit 2 not used.
Document Top
Activate at top of document.
Page Top
Activate at top of page.
Page Bottom
Activate at bottom of page.
Document Bottom Activate at bottom of document.