Software Manual
72
(3) Click “Launch Configuration Application” in the "TSP100 Config" tab.
(4) The "User Account Control" window will appear. Click "Yes".
(5) When the LAN function is installed with the standard setup, if an available printer is not
found, the following window will appear.
When using the TSP100LAN, click “OK” to start the Ethernet setup tool, and add the
required printer, referring to "1.3 Adding a Printer (TSP100LAN)", “1.4 Adding a
Printer(TSP100IIIW)” or “1.5 Adding a Printer(TSP100IIILAN)”.
When using a non-TSP100LAN printer, click “Cancel” to stop the procedure, and add the
required printer, referring to "1.2 Adding a Printer (TSP100U/PU/GT/ECO)".
To Next Page
Loading...