Registration of a smartphone:
1. Enable Bluetooth in the smartphone settings.
2. Select StarLine equipment from the list of available devices.
3. Enter the code "000000" (on the iOS platform, press the "Pair" button to enter the code).
Removing a smartphone from the memory
of the security system
A previously recorded smartphone in the system's memory will be automatically removed after
registering a new smartphone or tag.
Exiting the device registration mode
Exiting the "Device Registration" mode is automatic after 5 minutes or when the ignition is turned
off.
7.png
Image not found or type unknown
The exit will be confirmed by 2 flashes of the service button or transceiver LED and 2 sound
signals, followed by signals corresponding to the total number of registered remote keys, BT tags,
and smartphones.
If the Master-6 GSM+GPS module is connected and registered in the system's memory, the owner
will receive an SMS message listing the registered devices after the registration process is
complete.
If multiple registered smartphones are simultaneously in the vicinity, the system will only
work with the one that connects first.
Make sure to remove the system from the list of paired Bluetooth devices on your
smartphone.
To Next Page
Loading...
