35
3) Switch on ignition or wait for 5 seconds. The
LED on the service button will light up, the
number of ashes will correspond to the ordinal
number of the digit of the code of emergency
security deactivation (1,2, 3 or 4 times).
4) Switch on the ignition.
5) Repeat items 2-4 for the remaining code digits.
If the code of emergency security deactivation is entered correctly,
3 short sound signals of the horn and 3 ashes of light signals will
follow. The system will set to the «Security o» mode.
If the code of emergency security deactivation is entered
incorrectly 3 times, the possibility of repeated code entry
will be blocked for 15 minutes and an SMS-notication will
be sent to the owner’s telephone.
An attempt at digit entry will be indicated by 5 LED ashes.
To Next Page
Loading...
