Starline E96BT - Page 38

StarLine E96, E66
38
The owner authorization code consists of a code sequence,
containing from 5 to 30 pressings of the standard buttons.
The list of standard buttons supported by the car is given on
the website can.starline.ru
If a light signal does not follow after pressing of a standard
button, the button is not supported in the given car.
6) In 3 seconds after owner’s code entry, 2 short
signals of the LED on the service button will
follow, conrming code acceptance.
7) Enter the owner authorization code again.
8) If the code is entered correctly, 2 short signals
of the LED on the service button will follow. If
the code is entered incorrectly, 4 short light
LED signals will follow, in this case repeat items
7 and 8.
9) In 10 seconds switch o ignition to exit the
registration mode.
10) Exit from the registration mode will be
conrmed by 2 light signals of the LED
on the service button and by signals the
number whereof corresponds to the total
number of registered remote keys, tags and
smartphones.