user manual
49
Wireless tags (transponders) registration
1) Remove battery from a tag slot.
2) Push and hold tag button and insert battery
back in slot observing the right polarity (“+” side
top). The tag LED will light up red.
3) Release button and make sure a tag LED serial
red ashes come up for 10 seconds..
4) Successful registration will be conrmed by a tag
LED green ash, 2 service button LED ashes and
2 beep sounds. If a tag pairing failed then its LED
will light up red.
5) Repeat items 1-3 for remaining tags.
To Next Page
Loading...
