Starrett AVR200 User Manual

AVR200 and AVR300 User Guide
11 6106 Revision D
3. The AVR200 and AVR300 Systems
This section provides the following information:
• An overview of the AVR systems
• A description of the features and capabilities of the AVR systems
• A description of the configuration options
• A description of the major components of the AVR systems
3.1 Overview
The AVR systems provide a comprehensive CNC metrology solution for dimensional
measurement and inspection applications where high accuracy, extended travel, and a stable
base for multi-sensor measurements are required. The systems are available in two sizes:
the AVR200 with 200 x 100 x 200 millimeters (8 x 4 x 8 inches) of X-Y-Z travel and the
AVR300 with 300 x 200 x 200 millimeters (12 x 8 x 8 inches) of X-Y-Z travel.
3.2 Features and Capabilities
The AVR systems include the following features and capabilities:
• Includes a granite base for stability, recirculating ball linear guides for smooth and precise
stage motion, and full CNC control.
• All electronics, other than the PC system, are housed in the Z-column, providing a clean,
integrated system with minimal external wiring. Two high-speed data cables carry all
signals between the metrology unit and PC.
• Includes the following color video camera options:
• 1.3 megapixel (MP) camera with the standard configuration
• 2 megapixel (MP) camera with the FOV configuration
• 5 megapixel (MP) camera with the 0.14X telecentric lens configuration
• Metrology performance is provided by linear encoders with 0.1 micron resolution and by
precision optics, which can be 6.5:1 or 12:1 motorized zoom optics, manual 6.5:1 zoom
optics, or numerous telecentric lenses for accurate field-of-view (FOV) measurements.
• FOV measurements can encompass an entire small part up to 2.00 x 1.50 inches or a
feature of a larger part and be seamlessly integrated with stage motion to measure parts
with a length up to 200 mm (AVR200) or 300 mm (AVR300).
• 24-inch touch screen monitor and small form factor PC (system PC) which runs MetLogix
M3 CNC software under Windows® 10.
• Ergonomic workstation and easy to use operator controls
• Optional rotary stage that provides increased workpiece holding versitility.
• Optional touch probe that is ideal to measure the height of flat surfaces or the lateral
position of vertical surfaces at different heights.

Starrett AVR200 Specifications

General

Brand	Starrett
Model	AVR200
Category	Control Systems
Language	English