14
Functions
Delay
Set the Delay function:
1. Select a program
2. Press the Delay button to choose the time (the delaying time is 0-24 H.);
3. Press [Start/Pause] to commence the delay operation
Cancel the Delay function:
Press the [Delay] button until the display shows 0H. It should be pressed before starting the
program. If the program has already started, switch o program to reset a new one.
CAUTION!
If there is any break in the power supply while the machine is operating, a special memory stores the
selected program and when the power is restarted the program will continue.
Choose the
program
Set time Start
Pre Wash
The Prewash function provides an extra wash before main wash, it is suitable for washing
the dust that rises to surface of the clothes. Detergent needs to be added to case I when
this function is selected.
Extra Wash
For very dirty clothes choose this function, which will increase the washing time and
intensity to improve the washing eect.
Speed Wash
This function can decrease the washing time.
Extra Rinse
The laundry will undergo an extra rinse at the end of the wash cycle.
My Cycle
This function is used to memorise frequently used programs.
After choosing this program and setting the options, press [Spin] for 3 sec. before starting
to wash. The default setting course is Cotton.
Anti-Crease
Anti-Crease function can be used to reduce the wrinkles of clothes.
To Next Page
Loading...