Stavoklima s.r.o. | www.stavoklima.cz | DITRONIC-MANUAL | 33
OTHER SETTINGS
You can set other parameters here.
HEATING UP MODE TIME SETTING
If you enabled the heating up mode you can
set period of time for which the heating up
mode will be functional. The range of setting
3-15 minutes. 0.5min increments.
5:00
FILTER MAINTENANCE
INTERVAL SETTING
This function can dene the maintenance
interval for cleaning of the lter according
to working hours of the fan. The F symbol
appears after the value is exceeded. Twenty
hours before the interval ends the F symbol
blinks as warning of approaching maintenance.
350 hour
MANUAL VALVE TEST
This function permits to check valve opening and closing
without change to other parameters. This function is usually
used to test valve opening and closing. (Available only for
electro-thermal head.) This function operates for hot water air
curtains only.
Valve
manually ON
Valve
manually OFF
FILTER COUNTER DISPLAY ENABLE
This function enables activation of working hours counter
of the fan for the lter maintenance interval.
Not available for the electric units.
Filter
counter ON
Filter
counter OFF
En
DITRONIC-MANUAL
To Next Page
Loading...