ENGLISH
|
3
body and turning it on. Do not operate unit if Main Nozzle is blocked.
17. Burns can occur from touching hot metal parts, hot water, or steam. Do not touch Main Nozzle or
attempt to connect accessories while unit is in use. Do not touch removable accessories or attempt to
change accessories while unit is in use. Use caution when you turn unit upside-down – there may be
hotwater.
18. Use caution when using unit on uneven surfaces, such as stairs.
19. When steaming any surface for the rst time, it is recommended that you consult the manufacturer’s
guidelines for material being steamed. For items in question, test on an inconspicuous area
beforeproceeding.
20. Steaming unsealed hardwood or unglazed ceramic surfaces is not recommended, and may result in
warping or damage to the surface. Steam may remove the sheen from surfaces treated withwax.
21. When steam mopping, never leave unit resting in one spot on any surface for any period of time –
prolonged exposure to heat and moisture may damage oor surfaces.
22. Do not allow power cord to touch hot surfaces during use. Bundle cord loosely when storing.
23. Always allow unit to cool (at least 30 minutes for complete cooling) and empty before storing. Do not
store unit with damp accessories, including a Microber Pad, still attached.
NOTE: This product will continue to produce steam for a few seconds after the unit has been turned off.
24. Never operate unit without water in the Water Tank and do not ll above the Max line or below the
Min line.
WARNING: Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
SAVE THESE INSTRUCTIONS
Questions or comments?
•
steamfast.com
•
consumerservice@steamfast.com
•
1-800-711-6617
Speak your mind! We invite you to review this product online:
steamfast.com/reviews
To Next Page
Loading...
