Steamfast SF-162 - Troubleshooting Common Issues

ENGLISH
|
9
Troubleshooting
PROBLEM POSSIBLE CAUSE SOLUTION
Unit fails to heat up. Heating
Indicator Light DOES NOT illumi-
nate.
Unit is not plugged in. Plug power cord into electrical outlet.
The Power Button is pressed Off.
Make sure the Power Button is pressed to
turn the unit On, and Power Indicator Light
is illuminated.
Unit is damaged or otherwise in
need of repair.
Immediately cease usage and
unplug. Contact Consumer
Service for further assistance (see Page 10
for details).
Unit heats up, but fails to steam.
Power Indicator Light
doesilluminate.
(NOTE: Always allow proper time
for unit to heat up and begin
producing steam.)
Water Tank is empty. Refer to Filling Water Tank
procedure on Page 7.
Mineral build-up in unit. Refer to Mineral Build-up section on Page
8 for cleaning procedure.
Steam output is weak or intermit-
tent.
Mineral build-up in unit.
Refer to Mineral Build-up section on Page
8 for cleaning procedure.
Floor surfaces appear cloudy or
streaky after steaming.
Microber Pad is dirty. Replace Microber Pad with a cleanone.
Hard water residue on oor. Switch to distilled or de-mineralized
water.