EasyManua.ls Logo

Steamfast SF-162 - Page 5

Steamfast SF-162
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
|
5
The Handle (1) provides a comfortable grip during use of the unit.
The Cord Bracket (2) provide a safe and convenient way to store the power cord when not in use.
The Extension Pole (3) connects to the main body of the unit and can extend to a variety of
lengths for ultimate comfort.
The Adjustment Lever (4) is positioned on the Extension Pole and can change the height of the
Extension Pole to a variety of lengths.
The Water Tank Cap (5) covers the Water Tank Fill Hole and must be removed in order to ll the
Water Tank with Water. To unlock the Water Tank Cap, simply pull up (it does not unscrew).
The Water Tank Fill Hole (6) is the opening through which water is poured into the Water Tank.
The Water Tank (7) is the reservoir where water is held before being transferred to the heat
exchange and converted to steam. The Water Tank holds 10.8 oz. (319.4 ml.) of water.
The Power Button (8), located on the front of the Steam Mop, activates and deactivates the unit.
The Power Button is pressed to turn the unit On, and pressed again to turn the unit Off. A blue
light will illuminate on the Power Button to show the unit is ON.
The Mop Head (9) connects to the Steam Nozzle, for steam cleaning a variety of hard oors.
CAUTION: Steam being emitted from the unit is hot and can cause burns.
NOTE: It is NOT recommended that this unit be used on unsealed oors. Use care when
steaming oors that may be warped or damaged by heat and moisture, and limit use of this
unit on these types of surfaces.
The Microber Pad (10) attaches to the bottom of the Mop Head. The Pad is designed to clean
scuffs and stains from hard oors. The Pads are reusable and machine washable. One Pad is
included.
NOTE: Microber Pads are not designed to absorb and collect large amounts of dirt. For best
results, it is recommended to vacuum oor before mopping.
The Carpet Glider (11) attachment attaches to your SF-162 steam mop and allows you to steam
and freshen carpets, area rugs and other soft surfaces
The Measuring Cup (12) allows you to ll the Water Tank with minimal spillage.

Related product manuals