Steelcase 458 Sensor User Manual

Page 1 of 4
939501519 Rev A
458 Sensor
®
Chair Base, Base Cap, Caster And Glides
®
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©
2004 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
The following directions are provided to aid when replacing the
component parts or assemblies listed:
• Base Caps
• Casters & Glides
Typical 458 Sensor Chair
Index
NOTE: All specifications concerning installation procedures, in. - lbs.,
grease, etc. should be followed to insure proper chair function.
A. Base Caps ........................................................ 2 - 3
B
.
Casters & Glides
.............................................. 4

Steelcase 458 Sensor Specifications

General

Manufacturer	Steelcase
Model	458 Sensor
Adjustable Lumbar Support	Yes
Tilt Lock	Yes
Adjustable Height	Yes
Material	Fabric, Plastic, Metal
Warranty	12 Years
Adjustable Arms	Yes

Summary

Base Caps

Base Cap Replacement

Instructions for replacing the base cap on a chair.

Stool Base Installation

Procedure for removing and installing the base on a stool chair.

Fixed Base Installation

Instructions for removing and installing a fixed chair base assembly.

Swivel Base Installation

Instructions for removing and installing a swivel chair base assembly.

Casters and Glides

Caster Replacement

Procedure for removing and inserting new casters using a rubber mallet.

Glide Replacement

Procedure for removing and inserting new glides using a rubber mallet.