Steelcase 465 Think - User Manual

Page 1 of 19
939546506 Rev E
R
A
Y
B
O
Index
Topic Page
Removal of the Seat Cushion  2
Installation of the Seat Cushion  3
Removal of the Back Cushion  4
Installation of the Back Cushion  5
Removal & Installation of the 3D Knit Back Cushion  6
Installation of the Headrest  7
Removal of the Headrest  8
Removal & Installation of the Lumbar  9
Removal & Installation of the Back Frame  10
Removal & Installation of the Seat Frame  11
Removal & Installation of the Arms  12
Prior to October 3, 2005
Replacement of the Arm Cap  16
Removal & Installation of the Mechanism  17
Removal & Installation of the Base  18
Removal & Installation of the Pneumatic Cylinder  19
465 Think
®
for Customer Service
#2 and #3
Phillips
Torx
T15, T20 and T30
(An Allen wrench can
be subsituted if a torx
drive is not available)
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©
2006 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.

Steelcase 465 Think Specifications