Steelcase Empath User Manual

Empath™ Recliner Footrest Installation
Page 1 of 4
939502131 Rev C
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
© 2014 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
HEX DRIVE
(Footrest shown in the fully extended position)

Steelcase Empath Specifications

General

Brand	Steelcase
Model	Empath
Category	Indoor Furnishing
Language	English

Summary

Standard or Trendelenburg Foot Tray Installation

Attach Rear Brackets

Attach rear brackets to the chassis of the recliner.

Install Front Bracket

Install the front bracket to the main slide frame using specific button head cap screws.

Position Main Slide Frame

Position the main slide frame assembly in the center of the chair frame.

Fasten Main Slide Frame

Fasten the main slide frame to the rear mount brackets using button head cap screws.

Install Front Mount Bracket

Install the front mount bracket with a hex bolt, spring, washers, and nut.

Slide Out Tray

Slide out the tray and press it in the indicated direction to ensure quiet operation.

Position and Install Footrest

Position the footrest onto the slide frame assembly and install with screws and spacers.

Test Footrest Operation

Check Foot Tray Tightness

Verify the foot tray assembly is not loose when the user is standing or seated.

Adjust Hex Bolt Tightness

Loosen hex bolts if the foot tray is not actuating properly when stepped on.