Steepletone BRITANNIA - ENCODING FROM BLUETOOTH, TAPE, PHONO, AUX-IN, TUNER TO USB

12
3. Followtheinstructionof“PLAYINGACOMPACTDISC”toInserttheCDtotheCD1compartment.ThenTAPtheSTOPbutton
(5)tostoptheCDplayback.
4. TAPtheTSAUTO/MANUALbuttonontheremotecontroltoallowtrackseparation.
5. TAPtheRECbutton(21)
repeatedlytoselectUSBfortheencoding.
6. TAPtheGO/PLAY/PAUSEbutton(22)andthenTAPtheCD1PLAY/PAUSEbutton(6)tostarttherecording.
7. TheUSBiconwillflashontheLCDandencodingoftheCDDISChasstarted.
8. Aftertheencodinghasfinished,TAPthe
stopped(19)tostoptheMP3encoding.TheCDwillstopplayback.

MP3‐to‐USBENCODINGofAudioCDTracksbyProgram
1. SelectthedesiredCDtr acksbyfollowingthesameprocedureasfor“CDDiscProgramming”.
2. Followsteps4‐8asforEntireAudioCDencodingabove.

Notes:
– Therecordingspeedis1:1andaccordingtotheactualplayingtimeoftheCDtrack.
– Thesystemwillcreatean“RECORD“folderandthenstoretheencodedtrackinit.
– Therecordingformatispre‐setatMP3bitrate:128kbps,Samplingrate:44.1kHz.
– Song
titleswillnotberecordedduringencoding.
– Tostoprecording,TAPtheSTOPbutton(19)duringrecording.

B) MP3‐to‐USBENCODINGFROMBLUETOOTHRECEIVERORTAPE
1. PlugtheUSBdevice,e.g.aFlashDrivethatyouwishtorecordonto,intotheUSBPort(8)‐makingsureithasenoughmemory
toallowencodingandonlycontainsMP3formatfiles.

2. Switch on the unit (50) and TAP CD1/BT/TAPE function button  (20). Then TAP the Home button (13) to select either
BluetoothmodelorTapemode.

– For encoding from Bluetooth receiver: Follow the instruction of “BLUETOOTH CONNECTION AND PLAYBACK” to connect
theBluetoothdeviceandselectthetrackyouwishtoencodeandgetitreadyforplayback.
– ForencodingfromTape:PlacethecassettetapeyouwishtoencodereadytoplayintheCASSETTEPlayerslot(32)–donot
playityet.
3. TAPtheRECbutton(21)repeatedlytoselectUSBfortheencoding.
4. TAPthe GO/PLAY/PAUSEbutton (22)to start therecording.TheUSBiconwill flashon the LCD and encodinghas
started.
5. FromBluetoothreceiver:startplaybackoftheBluetoothdevice,orfromTape:
startplaybackofthecassettetape.
6. Afterencodinghasfinished,TAPtheSTOPbutton (19)tostoptheMP3encoding processandthenstoptheplaybackof
theBluetoothdeviceorTape.

C) MP3‐to‐USBENCODINGFROMPHONOORAUX‐IN
1. PlugtheUSBdevice,e.g.aFlashDrivethatyouwishtorecordonto,intotheUSBPort(8)‐makingsureithasenoughmemory
toallowencodingandonlycontainsMP3formatfiles.
2. Switchontheunit(50)andselectPHONOmodebyTappingtheFunctionbutton(24)
- ForencodingfromPhono:Placetherecordyouwishtoencodeontheturntableandgetitreadyforplayback.
- ForencodingfromAux‐in:Connecttheaudiodevice(suchasanMP3player,CDplayer,Radio,etc)viaitsheadphonesocket
tothe3.5mmAux‐injack(17)andgetitreadytoplay.
NoteforAux‐inoperation:Aconnectioncablewith3.5mmdia.Stereoplugswillberequired(notsupplied).
3. TAPtheRECbutton(21)repeatedlytoselectUSBfortheencoding.
4. TAPthe GO/PLAY/PAUSE  button(22)tostart therecording.TheUSBiconwill flashon the LCD and encodinghas
started.
5. FromPhono:startplaybackofthevinylrecord,orfromAux‐in:playthemusicoftheconnectedexternalaudioplayer.
6. After encoding has finished, TAP the STOPbutton (19) to stop the MP3 encoding process and then stop the Phono or
Aux‐inplayback.Removetherecordordisconnecttheexternaldevicewhenfinished.

D) MP3‐to‐USBENCODINGFROMTUNER
1. PlugtheUSBdevice,e.g.aFlashDrivethatyouwishtorecordonto,intotheUSBPort(8)‐makingsureithasenoughmemory
toallowencodingandonlycontainsMP3formatfiles.

2.
Switchontheunit(50)andTAPDAB/FMfunctionbutton(26).ThenTAPtheHomebutton(13)toselectthetuneryouwishto
record.

3.
Followtheinstructionof“FM&DABRADIOFUNCTION”totunetothedesiredradiostation.
4. TAPtheRECbutton(21)repeatedlytoselectUSBfortheencoding.
5. TAPtheGO/PLAY/PAUSEbutton(22)andthenTAPtheCD1PLAY/PAUSEbutton(6)tostarttherecording.
6. TheUSBiconwillflashontheLCDandencodinghasstarted.
7. Afterencodinghasfinished,TAPtheST OPbutton(19)tostoptheencodingprocessandturnof ftheturnerifnecessary.


