DELETING FILES ON USB / SD CARD (BY REMOTE CONTROL)
The system is able to erase the music files stored on a USB Flash Drive or SD Card. This function is performed
with the USB/SD Card connected, but in Stop Mode. The procedure is as follows:
Slide the Function Selector (9) to USB/SD Mode and then press the Source Button (4) to select either “USB” or
“SD” Mode.
A) DELETING A SINGLE FILE
With the USB device/SD Card, you wish to delete a track from, connected:
1. Press and hold the “INFO/ “ Button on the Remote Control for 3 seconds and the LCD Display (2) will
show (DEL---001).
2. Press the Skip Forward
or Backward Button to select the file to be deleted.
3. Press the “REC“ Button to enter “YES/NO” Mode and then press Skip Forward
or Backward to select
“YES” or “NO”.
4. Press the “REC“ Button to confirm the setting.
B) DELETING ALL FILES
To delete all the files/tracks on the USB device/SD Card connected:
1. Press and hold the “INFO” Button on the Remote for 3 seconds and the LCD Display (2) will show
(DEL---001).
2. Press the “INFO“ Button again to enter “YES/NO” Mode and then press skip forward
or backward
to select “YES” or “NO”.
3. Press the “REC” Button to confirm the setting.
4. Press the “STOP“ Button once on the Remote handset to exit the Delete Mode.
NOTE: All files on the USB storage device or SD/MMC Card will be fully and permanently deleted after “YES”
has been selected and confirmed.
REMOVAL OF A USB DEVICE / MEMORY CARD
It is not safe to remove the USB device / Memory Card until the main Power Knob is switched to OFF (17) or the
Function is switched to either “AUX” or “PHONO” mode.
• USB PORT – Unplug the device from the USB Socket by pulling it out straight.
• MEMORY CARD
– Press the Memory Card in gently and then release it, the card will be partially ejected and
can then be removed by hand.
LINE OUT CONNECTION
You can connect the system to another Hi-Fi System by connecting the Line-Out Socket (24) to the Auxiliary
Input socket of the other Audio Unit/Amp/PC, etc. with an RCA cable (L + R – cable not included).
AUX-IN CONNECTION
You can connect another audio device (e.g. a Cassette Player/iPOD/CD Player) via its Headphone Output Jack
and a cable with 3.5mm dia. plug to this system. Plug it into the Aux-in Socket (6) on the front of this unit for
either playback or encoding/recording to MP3 (USB/SD).
X-BASS OPTION
To add extra Bass sound, press this button, press it again to switch this function off.
SUBWOOFER JACK
Connect a powered Subwoofer to the Subwoofer Jack (27) on the rear of this unit to add extra BASS sound.
E-6
To Next Page
Loading...
