Steinbach Poolrunner S63 - Description; Description of the pool cleaner; Functions of the control unit

Checking the delivery for completeness and damage
1. Open the packaging carefully.
2. Take all parts out of the packaging.
3. Check the completeness of the delivery.
4. Check the delivery for damage.
Description
Description of the pool cleaner
The pool cleaner cleans your lled pool in automac mode.
The oang cable
1
supplies the pool cleaner in the water with the required power and
informaon.
The adjustable nozzles
9
determine the travel path and the speed of the pool cleaner.
The removable lter unit
3
lters the water and collects deposits in the pool.
Depending on the degree of soiling, an oponal brush
6
can improve the cleaning result.
You select the right cleaning program for your purposes with the control unit
5
.
Functions of the control unit
The power adapter integrated in the control unit supplies the pool cleaner with 24 V DC.
B
B
10
11
12
Cleaning cycle
11
10
The indicator
10
shows the cleaning cycle.
- S for small pools: the device cleans the pool for 1 hour.
- M for medium-sized pools: the device cleans the pool for 1.5 hours.
- L for large pools: the device cleans the pool for 2 hours.
A blinking indicator indicates the selected cleaning cycle.
When all indicators blink, the cleaning cycle is nished.
If all indicators are lit, the device has a fault. Contact customer service.
34