Steinbach Poolrunner S63 - Basic settings; Adjusting the nozzles

CYCLE function
11
Use this funcon to set the cleaning cycle.
Use the CYCLE buon
11
to switch between the cleaning cycles.
ON/OFF function
12
Use this funcon to switch the device ON and OFF.
Use the ON/OFF buon
12
to switch between the following funcons:
- ON (Switches the device on and starts the selected cleaning cycle.)
- OFF (Stops the selected cleaning cycle and switches the device o at the same me.)
Basic settings
Adjusting the nozzles
The following sengs are recommendaons. Adapt the basic sengs to the actual
properes of your pool.
0°/30°
(for most pools)
0°/40°
(to cover a large cleaning area)
1
2
35
en