MIDEX-8
English – 19
ENGLISH
5. Using the USB cable that came with the unit, you can now finally connect
your MIDEX-8 to the USB socket on your computer, as described on page
10 .
6. If your MIDEX-8 is already connected, remove the USB cable for a brief mo-
ment and connect it again or press the Panic/Cablecheck button to force a
device reset.
The MIDEX-8 should now automatically be recognized and receive its drivers in
the background. The blue operation LED should light up.
Downloading a new MIDEX-8 Driver from the Internet
If you have access to the Internet, you can surf to the Steinberg web
site to find out whether a newer version of the MIDEX-8 driver software
is available. This must have a higher version number than the driver on
the MIDEX-8 CD-ROM. If newer driver software is available, you should
download it and install it as described above.
Please point your Internet Browser to:
• http://www.steinberg.net/support/hardwaredriver
To Next Page
Loading...
