Need help?Do you have a question about the Steinberg UR22mkII and is the answer not in the manual?
General| Audio Resolution | 24-bit/192 kHz |
|---|---|
| Inputs | 2 x XLR/TRS Combo |
| MIDI I/O | Yes |
| USB | USB 2.0 |
| Type | Audio Interface |
| Software Included | Cubase AI, Cubasis LE |
| Outputs | 2 x TRS |
| Headphone Output | 1 x 1/4" |
| Phantom Power | +48V |
| Power Supply | USB bus-powered |
| Channels | 2 |
| Preamps | 2 x D-PRE |
| Dimensions | 159 mm x 46 mm x 159 mm |
Details the physical controls and indicators on the front of the UR22mkII audio interface, including knobs, jacks, and indicators.
Explains the connectors and switches located on the rear of the UR22mkII audio interface, such as USB, MIDI, and output jacks.
Allows selection of the audio sampling frequency for the UR22mkII device within the driver settings.
Configures the loopback function for broadcasting audio over the internet by mixing input and playback signals.
Adjusts the balance between input signals and DAW playback for monitoring purposes.
Configures ASIO driver settings like device selection, buffer size, and input/output latency.
Instructions for setting up the ASIO driver and loopback function on macOS.
Provides step-by-step instructions for connecting microphones and guitars to the UR22mkII.
Illustrates how to connect the UR22mkII to computers and iPads with diagrams.
Guides on setting up the UR22mkII with Digital Audio Workstation software like Cubase.
Explains basic recording and playback operations within Cubase and other DAWs.
Details how to use the UR22mkII with MIDI devices and VST instruments in Cubase.
Addresses issues where the USB indicator is off or flashing continuously.
Provides solutions for when there is no audio output from the device.
Helps diagnose and resolve audio issues like noise, interruption, or distortion.
Visual representation of the UR22mkII's internal signal flow and connections.
To Next Page
