Steinberg UR-RT4 User Manual (English)

Other manuals for Steinberg UR-RT4

Questions and Answers:

T
terrellkathleenJul 28, 2025
Why is there no sound from my Steinberg UR-RT4 Accessories?
- W
  whillJul 28, 2025
  If you're experiencing no sound with your Steinberg Accessories, ensure that the TOOLS for UR-RT has been properly installed. Also, verify that you are using a proper USB cable, replacing it if broken or damaged, and ensuring it's no longer than 3 meters. Check that the volume controls ([OUTPUT] knob and [PHONES] knob) are set to appropriate levels. Confirm that the microphones and monitor speakers are correctly connected to the device. Additionally, ensure that the audio driver settings on your DAW software are properly configured and that the [ASIO Driver] setting on the Cubase series program is correctly selected.
M
Michelle GibsonAug 3, 2025
What to do if there is no sound from Steinberg UR-RT4 Accessories after starting DAW?
- H
  hartjamieAug 3, 2025
  If you encounter a no sound issue after starting your DAW with Steinberg Accessories, make sure that the device was powered on before launching the DAW software. Also, check that the monitor speaker switch is turned on. If the buffer size is set too low, try increasing it.
J
jonesmanuelAug 12, 2025
How to fix unusual sound from Steinberg UR-RT4 Accessories?
- J
  Jay GayAug 12, 2025
  If you are experiencing unusual sound issues such as noise, interruption, or distortion with your Steinberg Accessories, first check if your computer meets the system requirements. If you are recording or playing long continuous sections of audio, reduce the number of audio tracks. Ensure that microphones are properly connected to the device using an XLR plug. Also, verify that the loopback function is properly set; turn it off when not in use.
E
Edward GrahamAug 18, 2025
What to do if my Steinberg UR-RT4 Accessories power does not turn on?
- J
  Jeremy NewtonAug 18, 2025
  If your Steinberg Accessories device isn't powering on, first ensure that the TOOLS for UR-RT has been installed correctly. Next, verify that the AC adapter is properly connected, as the UR-RT is not a bus-powered device. Also, confirm that you are using a suitable USB cable, replacing it if damaged, and ensuring it is no more than 3 meters long.

Steinberg UR-RT4 Specifications

General

Type	Audio Interface
Channels	4
Preamps	2
A/D Resolution	24-bit
Sample Rate	192 kHz
Bit Depth	24-bit
Analog Inputs	4
Analog Outputs	4
MIDI I/O	Yes
Phantom Power	Yes
USB	USB 2.0
Rupert Neve Designs Transformers	Yes
Direct Monitoring	Yes
Compatibility	Windows, macOS

Summary

Panel Controls and Terminals

Front Panel UR-RT4

Details the front panel controls and terminals of the UR-RT4 audio interface.

Panel Controls and Terminals

Rear Panel UR-RT4

Details the rear panel controls and terminals of the UR-RT4 audio interface.

Panel Controls and Terminals

Front Panel UR-RT2

Details the front panel controls and terminals of the UR-RT2 audio interface.

Panel Controls and Terminals

Rear Panel UR-RT2

Details the rear panel controls and terminals of the UR-RT2 audio interface.

Software

Yamaha Steinberg USB Driver

Explains the Yamaha Steinberg USB Driver software for computer communication and configuration.

ASIO Window (Windows only)

Describes settings within the ASIO window for audio driver configuration.

Software

dspMixFx UR-RT

Details the dspMixFx software for operating built-in DSP mixer and effects.

Software

Main Window

Explains the main window for configuring the entire signal flow in dspMixFx.

Channel Area

Describes the channel area for configuring input channel settings in dspMixFx.

Software

DAW Area

Explains the DAW area for configuring DAW channel settings in dspMixFx.

Master Area

Details the master area for configuring master channel settings in dspMixFx.

Software

Setup Window

Describes the setup window for configuring common device settings in dspMixFx.

Software

Dedicated Windows for Cubase Series

Explains windows for configuring device settings from Cubase series software.

Software

Sweet Spot Morphing Channel Strip

Details the Sweet Spot Morphing Channel Strip, a multi-effect for compression and EQ.

Software

REV-X

Describes REV-X, a digital reverb platform developed by Yamaha.

Software

Guitar Amp Classics

Explains Guitar Amp Classics, guitar amp simulations with advanced modeling technology.

Using with a Computer

Connection Example UR-RT4

Illustrates connection examples for the UR-RT4 with a computer.

Using with a Computer

Connection Example UR-RT2

Illustrates connection examples for the UR-RT2 with a computer.

Using with a Computer

Configuring Audio Driver Settings on the DAW Software

Guides on configuring audio driver settings within DAW software.

Recording/Playback

Explains basic recording and playback operations using a microphone.

Using with an iOS device

Connection Example UR-RT4

Illustrates connection examples for the UR-RT4 with an iOS device.

Using with an iOS device

Connection Example UR-RT2

Illustrates connection examples for the UR-RT2 with an iOS device.

Using with an iOS device

Recording/Playback

Covers basic recording and playback operations with Cubasis on an iPad.

Troubleshooting

Appendix

Limitations on the use of effects

Details the limitations on simultaneous use of Channel Strip and Guitar Amp Classics effects.

Appendix

Signal Flows

Illustrates the signal flow within the UR-RT4 audio interface.

Appendix

Signal Flows

Illustrates the signal flow within the UR-RT2 audio interface.

Appendix

Block Diagrams

Presents detailed block diagrams for the UR-RT4 at specific sample rates.

Appendix

Block Diagrams

Presents detailed block diagrams for the UR-RT2 at specific sample rates.

Appendix

General Specifications

Lists general specifications for both UR-RT4 and UR-RT2 models.

Appendix

Technical Specifications

Provides detailed technical specifications for the UR-RT4 audio interface.

Appendix

Technical Specifications

Provides detailed technical specifications for the UR-RT2 audio interface.

Appendix

Uninstalling TOOLS for UR-RT

Guides on how to uninstall the software tools for the UR-RT device on Windows and Mac.

Related product manuals

UR22mkII Recording Pack

Steinberg UR-RT4 User Manual

Table of Contents

Other manuals for Steinberg UR-RT4

Questions and Answers:

Steinberg UR-RT4 Specifications

Summary

Panel Controls and Terminals

Front Panel UR-RT4

Panel Controls and Terminals

Rear Panel UR-RT4

Panel Controls and Terminals

Front Panel UR-RT2

Panel Controls and Terminals

Rear Panel UR-RT2

Software

Yamaha Steinberg USB Driver

ASIO Window (Windows only)

Software

dspMixFx UR-RT

Software

Main Window

Channel Area

Software

DAW Area

Master Area

Software

Setup Window

Software

Dedicated Windows for Cubase Series

Software

Sweet Spot Morphing Channel Strip

Software

REV-X

Software

Guitar Amp Classics

Using with a Computer

Connection Example UR-RT4

Using with a Computer

Connection Example UR-RT2

Using with a Computer

Configuring Audio Driver Settings on the DAW Software

Recording/Playback

Using with an iOS device

Connection Example UR-RT4

Using with an iOS device

Connection Example UR-RT2

Using with an iOS device

Recording/Playback

Troubleshooting

Appendix

Limitations on the use of effects

Appendix

Signal Flows

Appendix

Signal Flows

Appendix

Block Diagrams

Appendix

Block Diagrams

Appendix

General Specifications

Appendix

Technical Specifications

Appendix

Technical Specifications

Appendix

Uninstalling TOOLS for UR-RT

Related product manuals