Stel F20 - Page 21

6947400000
21
2TS and 4TS are Special Modes.
With these two modes it is possible to start welding
with a lower or higher current than the set welding
parameter. Suitable for aluminum welding.
EXPLANATION OF SYNERGIC MIG SCREEN
SYMBOLS:
a Wire Speed Value;
b Current Symbol;
c Estimated Welding Current value;
d MODE :
e Welding Process Symbol;
f Welding Settings Symbol ( XL , Pre Gas, Post
Gas . );
g JOBS ;
h Access SETUP menu;
i Valore Bilanciamento Tensione di sinergia;
l Welding Arc Voltage symbol;
m Synergy voltage value
n JOB’s number;
o Thickness Material Value ;
p Material Thickness symbol;
q Type of Gas;
r Material and diameter wire;
s Welding Mode;
SYNERGIC MIG WELDING
DOUBLE PULSE
Select a DOUBLE PULSED SYNERGIC MIG
program
The double-pulse parameters can be changed as
follows.
1)Press the f button to access the parameter
adjustment screen.
h
f