Stellar
®
Heavy-Duty Telescopic Crane Owner’s Manual | Page 19
Shift Function Screen 1
Turn Speed Control On or Off.
Shift Function Screen 2
Dene how RPM Mode governs Speed Control.
RPM Mode
This allows your Speed Control function to act in
different ways depending on your preferences.
Speed control can either be activated in the
Shift Function Screen or programmed as the
quick function button. If the selection for RPM
Mode (which governs how Speed Control will
act) is set to Hi-Lo, engine speed will rise when
Speed Control is activated manually and remain
high until Speed Control is manually turned off.
If RPM Mode is set to DMD (Power on Demand),
the crane controller will automatically ramp
the engine speed up to high idle only while the
crane is actively being operated. During periods
of inactivity the engine speed will be returned
to low idle. When the Speed Control option
is toggled on, SPD will appear in the lower left
corner of the feedback screen when in Crane
Operating Mode.
Link
Link
Courtesy of CraneMarket.com
To Next Page
Loading...