How to fix a Stenner 45MHP2 adjustment ring that will not turn?
If the adjustment ring on your Stenner Water Pump won't turn, it could be due to a seized variable cam or adjustment ring. Grease the variable cam and cam slot, then clean and lubricate the ring.
Why are the components of my Stenner 45MHP2 Water Pump cracking?
Cracking components in your Stenner Water Pump may be due to chemical attack. Check the chemical compatibility of the materials used in the pump.
General warnings, cautions, and specific risks (electrical, chemical, fire, explosion).
Guidelines for plumbing, indoor/outdoor use, auxiliary devices, and injection points.
Information found on the pump's shipping box label.
Details and data presented on the pump's identification label.
Explains how to set dial rings for dual head pump outputs.
Provides an example for calculating dual head pump output.
Warnings about risks of chemical exposure during tube replacement.
Caution regarding pinch point hazards during tube replacement.
Warning about system pressure and chemical exposure during service.
General| Brand | Stenner |
|---|---|
| Model | 45MHP2 |
| Category | Water Pump |
| Language | English |
To Next Page
